Euroquip Limited
  
<< Home page
Tyre warmers | Drum heaters | Vessel heaters | Contact us | About us
 
HEATERS
TANK, VESSEL & SPECIAL EQUIPMENT HEATERS
 
MOULD HEATING
  
Menu

 



When moulding composite materials it is often necessary to warm and maintain the temperature of either the mould or the component in order to

  • reduce the curing time
  • improve the quality of the cure.

Euroquip heaters are used to achieve this condition. The flexible jackets provide a simple way of applying heat to the surface of the component during manufacturing. This is often also the method used for repairing damaged areas at a later date.

The materials we use for the jackets are low-adhesion Teflon-coated polyester, which reduces the possibility of the jacket sticking to the mould.

 

 

 


Technical Details
All Euroquip heaters are manufactured around the design of an element carrier retaining a spiral wound silicon-insulated resistance wire. The carrier is then thermally insulated, and an outer cover is sewn on. The method of fixing depends upon the application; these are typically webbing straps with quick-release buckles, draw cords, Velcro and eyelets.
Material
Polyurethane/Nylon
Polyester
Glass Cloth
Maximum wattage
500 watts per sq. metre
1000 watts per sq. metre
1200 watts per sq. metre
Maximum size
6.0m x 1.5m
6m x 1.5m
4m x 1.2m
Temperature range
100 degrees C
140 degrees C
190 degrees C
Properties
Flexible
Flexible
Temperature resistance
Easy-clean
Easy-clean
Easy-clean
Durable
Durable
Voltage
Standard 220/240 & 110 volts Low voltage on request
Temperature control
Pre-set thermostats range from 30 C in 10 C intervals
Capillary and bulb thermostats 0 - 90 C, 0 - 120 C, 20 - 220 C
Electronic control with LED display & touch-pad control 50 - 150 C

Euroquip Limited,  Shire Hill Industrial Estate, Saffron Walden, Essex CB11 3AQ United Kingdom
Telephone: +44 (0) 1799 523177 FAX: +44 (0) 1799 513714